ELL60 - Electronic Landing Light
To see and be seen
The landing light ELL60 is the logical evolution of ELL50 with even more power.
Despite its small size (diameter 60 mm) this headlight has an input power of 60
watts, which corresponds to a usual halogen headlight of 180 - 200 watts.
For the first time we have designed a new cooling system for the ELL60. In the
new developed central cooling, the cooling air is passed through the landing
light directly to the heat-sink. With this new system it is possible to implement
this high performance on such a small space.
Of course, the ELL60 is through its complete socketing absolutely vibration
inured and can be installed anywhere on the aircraft.
The peculiarity of our landing light based on light-emitting diodes is the
integrated anti-collision light (ACL). In this technique, the LEDs of the
landing light can be controlled as an anti-collision light and is therefore
integrated into our system of "intelligent synchronization". Thus, the ELL acts
both as a normal landing light as well as anti-collision light in flight
direction (ie forward) and increases the visibility of the aircraft in flight
significantly.
The ELL is pre-wired for easy connection to a cable with at least 1.5 mm²
conductor cross section of 0.5 mm² flexible high. The assembly instructions and
the shrink tubing required are attached.
Intelligent Synchronization
The integration of our well proven
Intelligent Synchronization allows a chronological sequence of power consumption for the
connected anti collision lights and prevents battery and generator from becoming
overloaded.
Mounting instruction
Mounting-Instruction - ELL60
Wiring Diagram - IS
Technical Specifications
Label
Description
Operating voltage
10 - 17 volts D. C., typically: 12.8 - 13.4 volts (on board power supply)
Wattage
approx. 60 watts (Replaces a 180 - 200 Watts Halogen Lamp)
Brightness
> 100.000 Candela
Fuse
10 Ampere (fusible cut-out or automatic fuse)
Diameter
approx. 60 mm
Installation depth
approx. 50 mm
Weight
approx. 130 g incl. connecting cables
Warranty
5,000 operating hours or max. 3 years
