SV-XPNDR-263 Mode S Class 1 Transponder
TSO'd, Class 1, Mode-S Transponder with TIS traffic reception (US only)
and 1090ES ADS-B Out capability. When paired with the Dynon SV-GPS-2020
or other suitable position source, the SV-XPNDR-263 is a rule-compliant
ADS-B Out solution.
The SV-XPNDR-263 is significantly lighter (1.8 oz) and smaller
than previous models. For maximum compatibility with existing
installation locations, it features the same mounting tray screw
locations, compact quick-release mounting tray design, and electrical
and antenna connections.
Additional Information
Note: Antenna not included. See SkyView Installation Manual for recommendations.
Integrated: Made for the
SkyView System, with control and annunciation appearing on the SkyView
Display. The transponder module can be mounted anywhere in the airplane
that is convenient.
ADS-B Out via 1090 ES: Meets
USA and Europe ADS-B Out Mandates. FAA ADS-B Mandate compliance requires
that a suitable GPS position source such as the Dynon SV-GPS-2020 GPS
Receiver/Antenna module be connected. Alternatively, a TSO’d GPS
position source can be used, typically from a connected certified GPS
IFR navigator.
Traffic: Features TIS Traffic (USA).
Dynon Warranty, Support, and Service: These transponder come with a 3-year Dynon Warranty.
| SPECIFICATIONS | SV-XPNDR-263 | |
| Usage: | 250 Watt; Can meet 2020 FAA ADS-B Out mandate | |
| Type: | Class 1 Mode S | |
| Compliance: | ETSO 2C112b Class 1 Level 2els, ETSO C166a Class B0, TSO C112c Class 1 Level 2els, TSO C166b Class B1S | |
| Supply Voltage (DC): | 9 - 33 V | |
| Power Consumption: | 0.15 A (idle) / 0.28 A (active) @ 14V DC | |
| Transmitter Power: | 250 W nominal at connector | |
| Weight: | 0.66 lbs (300 g) | |
| Dimensions: | 1.5" H x 2.6" W x 5.9" L (H 37 x W 64 x L 149 mm) |
Connections: The SV-XPNDR-263 connects to a serial data line on each SkyView Display.
TNC Connector: The TNC connector is not supplied by Dynon. Specification: Dual Crimp RG142-400 AMP Male.
Mounting: At only .66 lb and 5.9" by 1.5" by 2.6", the transponder module can fit into the tiniest places and aircraft. A quick release mounting system allows for simple installation and easy removal if needed for service.